Default setting disable bass sound on 2.0

2 posters

Go down

Default setting disable bass sound on 2.0 Empty Default setting disable bass sound on 2.0

Post by cmsal Fri Aug 24, 2018 11:43 pm

Hello!
Default setting disable bass sound on 2.0. With setting in LAV Audio - Mixing on.
Fragement for test: http://rgho.st/6WYLTNZxZ

cmsal

Posts : 5
Join date : 2018-08-24

Back to top Go down

Default setting disable bass sound on 2.0 Empty Re: Default setting disable bass sound on 2.0

Post by Admin Sat Aug 25, 2018 1:34 pm

That is normal. Including LFE channel in downmix is optional. Not all speakers are good at reproducing low frequencies. Some movies also contain unwanted high frequency sounds in their LFE channel, which can reduce quality if played on normal speaker instead of subwoofer.

To enable it:
Codec Tweak Tool > Audio Output > Include LFE

Admin
Admin

Posts : 7577
Join date : 2011-06-17

https://codecs.forumotion.net

Back to top Go down

Default setting disable bass sound on 2.0 Empty Re: Default setting disable bass sound on 2.0

Post by cmsal Sat Sep 29, 2018 9:50 am

Thanks for answer!
Think about it much time. And think if film have sound on 0.1 (LFE), that it transmit some sound load, that plan author of film.
I too want listen what contain LFE of different films and through settings i unable set only LFE channel, always stay stereo channel (try remap mpc). If you know way to do this, please say. It help finally decide, have it matter or not.

cmsal

Posts : 5
Join date : 2018-08-24

Back to top Go down

Default setting disable bass sound on 2.0 Empty Re: Default setting disable bass sound on 2.0

Post by cmsal Sat Sep 29, 2018 10:22 am

And additionally question.
Phrase "To minimize sound distortion, it is recommended to keep player volume at around 85% when playing loud lossy-encoded content" it relate sound level mpc-hc or other? Now i have 3 sound level: system, mpc-hc and music center. Other too keep not more than 85%?

cmsal

Posts : 5
Join date : 2018-08-24

Back to top Go down

Default setting disable bass sound on 2.0 Empty Re: Default setting disable bass sound on 2.0

Post by cmsal Sat Sep 29, 2018 3:13 pm

With volume level 85% in programm maybe make checkbox with limit volume.

cmsal

Posts : 5
Join date : 2018-08-24

Back to top Go down

Default setting disable bass sound on 2.0 Empty Re: Default setting disable bass sound on 2.0

Post by Admin Sun Sep 30, 2018 2:01 pm

System volume below maximum should be fine. That recommendation is only for rare cases.

I am not sure I understand your other question. Why would you want to listen to only LFE channel?

Admin
Admin

Posts : 7577
Join date : 2011-06-17

https://codecs.forumotion.net

Back to top Go down

Default setting disable bass sound on 2.0 Empty Re: Default setting disable bass sound on 2.0

Post by cmsal Sun Sep 30, 2018 2:56 pm

>I am not sure I understand your other question. Why would you want to listen to only LFE channel?
To know what i miss if off him. How now i understand 0.1 channel may have some sound.
Test fragment in stereo, but i try show what 0.1 channel can contain. If something about this erase from sound scene of film, i dont want this.
https://d1490khl9dq1ow.cloudfront.net/sfx/mp3preview/lfe-rumble_M1mBHhNu.mp3
https://d1490khl9dq1ow.cloudfront.net/sfx/mp3preview/lfe-hit_fyQ2z2E_.mp3

cmsal

Posts : 5
Join date : 2018-08-24

Back to top Go down

Default setting disable bass sound on 2.0 Empty Re: Default setting disable bass sound on 2.0

Post by Admin Sun Sep 30, 2018 3:30 pm

To hear LFE only:
1) LAV Audio Decoder -> Disable mixer
2) MPC-HC audio switcher -> Custom channel mapping
For 6 (and 8) input channels.
Default setting disable bass sound on 2.0 4t9c9z

Admin
Admin

Posts : 7577
Join date : 2011-06-17

https://codecs.forumotion.net

Back to top Go down

Default setting disable bass sound on 2.0 Empty Re: Default setting disable bass sound on 2.0

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum