MPC-HC will close now, error

View previous topic View next topic Go down

MPC-HC will close now, error

Post by Elizabeth23 on Thu Nov 03, 2016 3:20 pm

Hi, just came to post and saw the new post by char12345 on this same issue, but the error message was different, if I can I will insert a pix of the error I took with a screen shot.

the only listing in the FAQ was for MPC-HC crashing with .rm files the error shows this to be a .ax.

1. solution: I just click ok, restart the player and start playing at the same song from my song list that it stopped on. and it goes on fine, This error has happened approx. 4 times since I installed this program, but each time I just click ok and restart the program, I listen to music for hours on end so 4 times in a week and one/half is not a lot of times.
2. I cannot reproduce the error as I do not understand the technical details of the error. Smile
3. winxp sp3, fully up to date.



4. below is the log created with the codec tweak tool, in case you need it.

Codec Tweak Tool | Log file | Generated at 2016-11-02 23:06:15

##### System Information #####

OS: Microsoft Windows XP Service Pack 3 (5.01.2600)
DirectX: 9.0c
CPU name: Intel(R) Pentium(R) 4 CPU 2.80GHz
CPU speed: 2793 MHz (1t)
Memory: 2048 MB
Screen size: 1024x768 (32bits) (60Hz)
Video card: Intel(R) 82865G Graphics Controller
VendorID: 8086, DeviceID: 2572, SubSys: 019d1028
Video mem: 96 MB
Video driver: i865G (Version 6.14.10.4396) (9-20-2005)
Audio device: SoundMAX Integrated Digital Audio
VendorID: 8086, DeviceID: 24d5, SubSys: 019d1028
Audio driver: smwdm.sys (Version 5.12.1.5246) (1-27-2005)

##### K-Lite Codec Pack #####

KLCP version: 12.4.7 (base 12.4.4)
KLCP type: mega

Speaker conf: 2.0

MPC renderer: System Default
MPC subs: ISR

##### Decoder Settings #####

LAV Video:
H264=1 HEVC=1 VP9=1 VC1=1 MPEG2=1 MPEG4=1 WMV3=0

LAV Audio:
MP3=1 AAC=1 Vorbis=1 AC3=1 DTS=1 LPCM=1 WMA=0

ffdshow (x86):
H264=0 VC1=0 MPEG2=0 XVID=0 DX50=0 DIV3=0 FLV1=0 RAW=0
MP3=0 AAC=0 Vorbis=0 AC3=0 DTS=0 LPCM=0 RAW=0


##### DirectShow Filters (32-bit) #####

(A total of 102 filters, 0 shown, 102 hidden)

##### ICM Class Manager (32-bit) #####

(A total of 4 filters, 0 shown, 4 hidden)

##### Default source filters (32-bit) #####


(A total of 70 default source filters, 0 shown, 70 hidden)

##### ACM and VFW Codecs (32-bit) #####

(A total of 31 codecs, 0 shown, 31 hidden)

Let me know if you need further info,


Elizabeth23

Posts : 5
Join date : 2016-11-01
Location : Florida, USA

View user profile

Back to top Go down

Re: MPC-HC will close now, error

Post by Admin on Fri Nov 04, 2016 2:31 am

The crash is caused by an audio decoder from Windows. I am not sure why it happens, as it normally should not be used.

You can solve it this way:
MPC-HC options > External Filters > Add "MPEG Layer-3 Decoder" and block it

Which merit value did it show after adding it? The default value for this filter is 00600001.

Admin
Admin

Posts : 2977
Join date : 2011-06-17

View user profile http://codecs.forumotion.net

Back to top Go down

Re: MPC-HC will close now, error

Post by Elizabeth23 on Fri Nov 04, 2016 4:38 am



as you can see above the merit value is 00810000, this is what it was before blocking and after blocking.

Elizabeth23

Posts : 5
Join date : 2016-11-01
Location : Florida, USA

View user profile

Back to top Go down

Re: MPC-HC will close now, error

Post by Admin on Sat Nov 05, 2016 2:12 am

That higher merit explains why it was used.

The codec pack normally lowers its merit automatically during installation. So either that failed somehow, or something has reset it.

Admin
Admin

Posts : 2977
Join date : 2011-06-17

View user profile http://codecs.forumotion.net

Back to top Go down

Re: MPC-HC will close now, error

Post by Elizabeth23 on Sat Nov 05, 2016 4:03 am

Okay, should be alright now, then, Smile Thank You

will post again if it ever happens again, unless you think it is not necessary, Smile

Elizabeth23

Posts : 5
Join date : 2016-11-01
Location : Florida, USA

View user profile

Back to top Go down

Re: MPC-HC will close now, error

Post by Sponsored content Today at 7:10 pm


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum